關閉
您的詢價車是空的。
NPN D.on | OAP-4004-NK | OAP-4004S-NK | OAP-4008-NK | OAP-4008S-NK |
NPN L.on | OAP-4004-N2K | OAP-4004S-N2K | OAP-4008-N2K | OAP-4008S-N2K |
PNP D.on | OAP-4004-PK | OAP-4004S-PK | OAP-4008-PK | OAP-4008S-PK |
PNP L.on | OAP-4004-P2K | OAP-4004S-P2K | OAP-4008-P2K | OAP-4008S-P2K |
光軸數 | 4 | 8 | ||
檢測高度 | 120 mm | 280 mm | ||
光軸間距 | 40 mm | |||
檢出方式 | Through beam / 對照式 | |||
分辨率 | 60 mm opaque object 不透明物體 | |||
檢出距離 | 0.1 M ~ 5 M | 0.1 M ~ 2 M | 0.2 M ~ 5 M | 0.2 M ~ 2 M |
發光源 | Infrared LED:850 nm | |||
LED指示燈 | 5 LEDs each on emitter and receiver. / 在發射端與接收端各有5個LED燈 | 7LEDs each on emitter and receiver. / 在發射端與接收端各有7個LED燈 | ||
LEDs blink from top to bottom under the normal emission.All LEDs light up under the emitting circuit failure and will become blinking until the normal emission. / 在正常通電情況下,LED燈由上而下的閃爍。在發射端光軸被阻隔時,所有LED燈 會全亮。如果恢復正常,即發射端光軸不被阻隔,LED恢復由上往下的閃爍 | ||||
運轉方式 | More than one beam is covered ON (Dark On) / 任意一個光束被遮斷即輸出 | |||
工作電壓 | DC12 ~ 24 V±10% (ripple P-P:10% Max.) | |||
消耗電流 | Transmitter:30 mA Max. | Transmitter:60 mA Max. | ||
Receiver:15 mA Max. | Receiver:30 mA Max. | |||
負載電流 | 100 mA Max. at DC 24V | |||
保護電路 | Reversed Supply circuit protection, Short circuit protection output / 電源反接保護及輸出短路保護 | |||
反應時間 | Off to On:15 ms Max. | |||
On to Off:20 ms Max. | ||||
隔離阻抗 | 20MΩ min. (DC500V) | |||
絕緣耐壓 | AC1000V 60HZ for 60 Sec. | |||
工作溫度 | - 10 ℃ ~ + 45℃ (No freezing allowed / 不可結霜,結冰) | |||
工作溼度 | 35% ~ 85% RH 相對溼度 | |||
儲存時溫度 | - 10 ℃ ~ + 45℃ (No freezing allowed / 不可結霜,結冰) | |||
儲存時溼度 | 35% ~ 95% RH 相對溼度 | |||
防水等級 | IP62 | |||
外觀材質 | ABS | |||
出線方式 | Transmitter:M12 pigtailed type(5P) / M12 出線式接頭型 | |||
Receiver:M12 pigtailed type(5P) / M12 出線式接頭型 | ||||
選購配件 | OAP-M008 Mounting Bracket / OAP-M008固定架 | OAP-M016 Mounting Bracket / OAP-M016固定架 | ||
Connectors / 線材:M125R-PUR-2M / M125R-PUR-5M | ||||
重量 | 200g | 253g |
Model / 型號 | (A) | (B) | (C) | (D) |
OAP-4004(S)-□K | 180mm | 190mm | 120mm | 3 |
OAP-4008(S)-□K | 340mm | 350mm | 280mm | 7 |